1 2 3
Hot Keywords: special lighting, entertainment, lighting, LEDLOGO lights

NEWSNEWS

CONTACT USCONTACT US

Zhongshan Guangnongying Photoelectric Technology Co., Ltd.
Contact: Mr. Liang
Mobile: 13726016468
Contact: Miss. Liang
Mobile: 18814242018
Telephone: 0760-88750211
Fax: 0760-88750211
Company address: 8 floor, building D, No. 368 east coast road, Guzhen Town, Guangdong, Zhongshan


International Lighting Electric Research Institute (Hongkong) Co., Ltd. Fax: 00852-30696448
Telephone: 00852-30696449
Mailbox: gny@gny88.com
URL: www.gny88.com

News detail
Your location:Home » News detail
Installation method of several commonly used LED lamps
Publisher:admin Add time:2017/4/5 Browse times:302

At present, the purchase of LED lamps as more and more families Home Furnishing lighting, with the electricity supplier of popularization, the popularity of online shopping, many consumers choose LED lamps in the online purchase, bought products online, manufacturers generally do not pack installed, then you learn how to install, for some simple LED lamps, everyone completely you can install LED lamp manufacturers below St. Magnus to teach you how to install LED lamp simple.
First, LED ceiling lamp: LED ceiling lamp used in home lighting in general, can be used in the living room, bedroom, study, corridors and other places of illumination. LED ceiling lamp has a variety of shapes, round, square, rectangular and other base, and the size of different. Generally in the purchase, LED lamp manufacturers will be equipped with related accessories, such as screws, etc., if there is no match, then you need to buy their own. The base of the lamp can bolt expanding tube, can also use wood screws in embedded block fastening holder, if the base is relatively large, more than 100 mm, you need to use the 2 screws. The number of screws shall be installed in accordance with the number of mounting holes of the lamp. After fixing the chuck chassis, install the lampshade back to finish the installation.
Two, LED ceiling lamp: LED ceiling lamp for embedded lamps, suitable for ceiling, like Home Furnishing lighting can be used for auxiliary lighting living room, LED ceiling lamp appearance is cylindrical, mouth wide metal ring, after installation close to the ceiling, has a very good decorative, installed first the ceiling lamp tools according to the corresponding lamp hole size hole, and then follow the instructions for use terminals connected with the lamp wire, the spring on both sides of the vertical hole into the buckle, ceiling, spring down products on both sides of the buckle, determine whether the installation is stable. LED LED and the installation method of the ceiling lamp is similar.
Three, LED bulb shape with traditional incandescent lamp LED bulb is similar to that used for lamp chandelier or in the most simple and convenient installation, LED bulb interface basic can interface compatible with traditional incandescent lamp, such as E27, E14 etc., directly to the thread bayonet card into the lamp holder you can, but need to pay attention to tighten, lest fall off and damaged.


博聚网